Autopilot; Autopilot™ Controls - MINN KOTA POWERDRIVE Mode D'emploi

Masquer les pouces Voir aussi pour POWERDRIVE:

Table des Matières

Les langues disponibles

AUTOPILOT™ CONTROLS

Your PowerDrive may be purchased with factory installed AutoPilot. The Minn Kota AutoPilot™ uses a magnetic compass and

microprocessor chip to keep the trolling motor pointed in the direction you want to go. Each time the wind or water current moves the

boat off course, the AutoPilot senses the change and steers itself back to the original heading. The AutoPilot direction is set every time

a steering change is made. To change direction, steer until the control head points to the desired course. The AutoPilot will pull the bow

of the boat around and correct automatically until the boat is moving in the direction you chose.

AutoPilot

AutoPilot uses an internal compass to provide heading lock. When AutoPilot is on, it keeps the motor pointed in the same compass

direction. If a manual steering correction is made, AutoPilot locks onto the new compass heading to which the boat was steered. This

method of heading tracking does not take into account external forces such as a side wind or currents, which can allow side drift.

This unit uses a magnetic compass to detect direction of travel. The compass can be adversely affected by magnets or large, ferrous

metal objects near (within 12" of) the trolling motor control head.

Obstructions on the propeller may cause excessive vibration of the motor head. This vibration can cause the compass to wander and

erratic steering to occur. Clear the obstruction to return the motor to normal operation.

aUTOPIlOT™

Possible Deviation

due to Wind/Current

AutoPilot Heading

AutoPilot Button

CAUTION

minnkotamotors.com | 29

Table des Matières

Table des Matières