Engine Identification; Electrical Equipment; Ruggerini Service - Ruggerini RY70 Usage Et Entretien

ENGINE IDENTIFICATION

A
B
C
D
E

ELECTRICAL EQUIPMENT

RUGGERINI SERVICE

Engine identification plate (15, figure 1).
A= (Type) engine type
F
B= (No.) engine serial number
G
C= (Omol.) type approval code
D= (cc) displacement in cm³
The wiring diagram can be found in figure 24 on page 83.
1. Ignition key (optional)
2. Voltage regulator
3. Engine starter
4. Battery (not included)
5. Alternator
6. Pressure switch
7. Battery recharge warning light (optional)
8. Oil pressure warning light (optional)
9. Solenoid valve
Correct and constant maintenance of the engine is an essential condition to ensure its
endurance, thus reducing operating costs. To request servicing or spare parts, contact
one of the authorised Service Centres listed in the " WORLD SERVICE ORGANISATION "
booklet you will find inside the bag containing the accessories, specifying:
- all data found on the engine identification plate,
- kind of intervention.
For any further information, contact Ruggerini Service.
E= (rpm) standard RPM
F= (Version) version
G= (rpm setting) special RPM setting
English
25