Maintenance Summary Table; Lubrication Points - Grillo FD 2200 TS stage V Manuel D'utilisation

PROCEDURE
check the level
Engine oil
change
check
Air filter
replace
check the level
Hydraulic
oil
replace
Mower deck gearbox oil
Check that the cooler
intake grid is clean
Check that blades are
well-sharpened and well-
fixed
Lubricate with grease
● recommended procedure
‫ ٭‬procedure to be carried out if necessary

LUBRICATION POINTS

Find the lubrication points following the scheme below. Grease the rear axle pivots, the pedals, the PTO
transmission belt guide pulley, the pivot connected to 2 points joint of the cutting deck, the grass catcher lifter arms,
the turbine shaft and the PTO tensioner (fig. 24) every 50 hours.
FD2200TS/ Translation of the original instructions

MAINTENANCE SUMMARY TABLE

EVERY AFTE EVERY
8 R 20
HOURS HOUR HOURS
S
●
●
●
●
●
●
EVERY EVERY
50 100 250
HOURS HOURS
●
‫٭‬
●
●
13
EVERY EVERY
300 500
HOURS HOURS HOURS
●
●
(first
change
at 500
hours)
●
EVERY
1000
●