Preparing To Install - Bartscher C5230 Mode D'emploi


Never place the oven near combustible materials or containers made of flammable
materials (such as walls, furniture, partitions, gas cylinders) since it could lead to a
fire hazard. In case it is not possible to meet this requirement, cover the flammable
components with non-flammable thermo-insulating material, and follow the fire
regulations strictly.
5.1.3

Preparing to Install


Remove the outer packaging (wooden box and/or cardboard) and dispose of them in
accordance with the regulations in force in the country of installation.
Remove the protective film

Remove the protective film completely from the
external and internal walls.

Remove any accessories, informational materials and
plastic bags from the oven.
Adjusting the feet
CAUTION!
Do not use the oven without the feet.

When the oven is used without the feet, the air flow
needed to cool digital components and external
walls is not provided, and this can cause
overheating and damage to the oven.

The adjustable feet are attached with the packed
unit and must be screwed to the oven.

The correct flat position of the oven ensures its trouble-free operation. Such position
is achieved by adjusting the feet and checking it with a spirit level. To adjust the feet,
simply tighten or loosen them.
39