Installation And Operation; Instructions For The Installer; Preparation - Bartscher C5230 Mode D'emploi

Masquer les pouces Voir aussi pour C5230:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 61

5. Installation and operation

5.1 Instructions for the installer

CAUTION!
Any works related to the installation, connection and maintenance of the device
may only be carried out by a qualified and licensed technician in accordance with
the applicable international, national and local regulations.
Instructions
Read this instruction manual carefully before installing and starting the device.
At all stages of the installation, assembly, operation and maintenance, the works
should be performed by qualified personnel who meet the requirements for
professional training (approved by the manufacturer or vendor), and taking
into account the applicable legislation of the country of installation and
regulations on product safety and safety at work.
Do not use any accessories or spare parts that are not recommended by the
manufacturer. They may result dangerous to the user, cause damage to the oven or
lead to personal injuries; moreover, the use of such accessories and spare parts will
void the warranty.
Periodically, check that the power cord is not damaged. Do not use the appliance if
the power cord is damaged. If the power cord is damaged it must be replaced by a
serviceman or a qualified electrician in order to avoid any hazards.
Improper installation, operation, maintenance or cleaning, and any changes or
modifications may lead to malfunction, damage or injuries.
The manufacturer disclaims any liability for damage to persons or property caused
by the failure to comply with these rules or due to the user's tampering of any
components of your appliance and failure to use the original spare parts.
5.1.1

Preparation

Immediately after receiving the appliance, make sure that it has not been damaged
in transit, and that the packaging is not damaged. In the case of damage or missing
components, immediately notify the shipper or vendor/manufacturer providing the
article and serial numbers (nameplate is on the back of the unit) and attaching
photo evidence.
37

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

C4430C6640206782206783206797

Table des Matières