Cardin Elettronica SL Série Mode D'emploi page 84

Cancelling all user codes from memory:
1) Scroll to the
WIPE ALL MEMORY
request 'CANC ALL MEMORY?' will appear on the LCD
2) Press to return to the previous screen without cancelling any codes or press
CELLING' along with a progress bar will appear on the display.
3) Once the total cancellation has been carried out the display will return to 'WIPE ALL MEMORY'.
MEMORISING ULTERIOR CHANNELS VIA RADIO S449 - S486
• The system can be remotely activated using radio control devices; (without opening the receiver) if the
5p has been activated in the
1) Using a transmitter, in which at least one channel button 'A, B, C or D' has already been memorised in the
receiver, press the button in the transmitter as shown in the drawing.
Note: all the receivers within range when the channel button is pressed (and which have at least one of
the transmitter channel buttons memorised) will activate their signal buzzer 'B1' (fig. 1-2).
2) Press one of the channel buttons on the same transmitter. The receivers which do not contain that channel code will sound a five-second
long 'beep' and will then deactivate. The receivers which contain the channel code will sound a one-second long 'beep' and will enter
the 'programming via radio' mode.
3) Press the previously chosen channel buttons on the transmitter which you wish to memorise; the receiver will sound 2 'beeps' of half a
second each after which the receiver will be ready to receive another code.
4) To leave the programming mode wait for 3 seconds without pressing any buttons. The receiver will sound a five-second long 'beep' and
will then exit the programming mode.
Note: When the memory is entirely occupied the buzzer will sound 10 rapid 'beeps' and will automatically leave the
mode.
The same signal is given each time you try to enter 'memorising ulterior channels via radio' when the memory is full.
Attention: the
REMOTE MEMORISE
programming menu.
step in the
REMOTE
menu.
OPTIONS
procedure can only be carried out after programming has terminated and you have quit the setting/
menu and confirm using the 'PROG/OK' button: a procedure confirmation
to wipe the memory content: the indication 'CAN-
84
REMOTE MEMORISE
Description : MEMORIZZAZIONE CODICE TX-RX
Drawing number : DM0531
Product Code : RCQ449100
Date :
Draft : P.J.Heath 13-04-2001
CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0
REMOTE MEMORISE
parameter