Optional Parameters - Cardin Elettronica SL Série Mode D'emploi

5) Optional parameters:

5a) Sequential command
• With highlighted press PROG/OK.
OPTIONS
• Press PROG/OK to scroll between the available choices:
- OPEN-STOP-SHUT (open-stop-shut-stop) - OPEN-SHUT.
• Press the arrow button
save the choice and move to the next parameter.
This option determines the behaviour of the TD command which may be activated by a button wired to the TD input at
binding post 21 or remotely using a radio control transmitter chosen in 'CHANNEL FUNCTION' under the
menu.
5b) Automatic reclosing
• Press PROG/OK to scroll between the available choices:
- ON - OFF
• Press the arrow button
move to the next parameter.
This option determines the behaviour of the automatic mode, see chapter
5c) Pre-flashing
• Press PROG/OK to scroll between the available choices:
- ON - OFF
• Press the arrow button
move to the next parameter.
With pre-flashing set to ON the programmer will flash for about three seconds after any command has been received.
to confirm the choice eg. OPEN-STOP-SHUT. The programmer will
to confirm the choice eg. ON. The programmer will save the choice and
to confirm the choice eg. ON. The programmer will save the choice and
REMOTE
.
FUNCTION MODES
61
5a) Sequential command
SEQUENTIAL COM.
OPEN-STOP-SHUT
AUTO. RECLOSING
ON
PRE-FLASHING
ON
5b) Automatic reclosing
SEQUENTIAL COM.
OPEN-STOP-SHUT
AUTO. RECLOSING
ON
PRE-FLASHING
ON
5c) Pre-flashing
TA S T O D I N A M I C O
APRE - STOP - CH
AUTO. RECLOSING
ON
PRE-FLASHING
ON