Language Selection - Cardin Elettronica SL Série Mode D'emploi

• The symbol on the start-up screen indicates that the ECU is working off battery power at 100%:
- the symbol on the start-up screen indicates that the ECU is working off battery power at 75%;
- the symbol on the start-up screen indicates that the ECU is working off battery power at 50%;
- the symbol on the start-up screen indicates that the ECU is working off battery power at 25%;
- the symbol on the start-up screen indicates that the ECU is working off battery power at 0%.
• The number of manoeuvres carried out by the automation, in this case 00.000.007, together with the
date 07-06-16 and the time 15.35 are always shown on the start-up screen.
• All the functions of the electronic programmer can be set in the display menu using the three buttons
located below it:
- use the arrows
PROG/OK
- use to modify the parameter settings and/or to confirm.

2) Language selection

• Press the arrow buttons simultaneously to enter the language sub menu.
• Press the arrow buttons to change the language: Italian - French - English etc.
PROG/OK
• Press the button to confirm the choice.
• The display will return to the start-up screen with your chosen language set.
to navigate through the menu;
53
1b) Start up screen
(battery power)
PROGRAM
TB FI TA FD
FS CP TC TAL
00.000.007
07-06-16 15.35
PROG/OK
2) Language selection
ITALIANO
FRANÇAIS
ENGLISH
NEDERLANDS
DEUTSCH
ESPAÑOL
PROG/OK