Yamaha FX Nytro 2008 Manuel D'atelier page 476

2
1
OIL PAN AND OIL PUMP
REMOVAL
1 1. Remove:
• Oil pan 1
NOTE:
Loosen each bolt 1/4 of a turn at a time, in stages
and in a crisscross pattern. After all of the bolts are
fully loosened, remove them.
2. Remove:
• Oil pump driven gear 1
NOTE:
• While holding the oil pump driven gear with the
rotor holding tool 2, loosen the oil pump driven
gear bolt.
• To prevent the oil pump chain falling into the
crankcase, fasten it with a wire.
Rotor holding tool:
90890-01235
Universal magneto & rotor holder:
YU-01235
INSPECTION
1. Inspect:
• Oil pump housing
• Oil pump covers
Cracks/damage/wear → Replace the defec-
tive part(-s).
5-47
ENG