Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

APPL IAN CE D ES CRIP T IO N
s
THE FUNCTION BUTTONS
For your control, the control light by the activated button lights up as long as the
function is in use. Once the function has been completed, the corresponding con-
trol light goes out.
A
Vac Seal / STOP
Button with two functions:
1. Vacuuming and automatic sealing
Pressing this button once will first start the vacuuming process and then auto-
matically complete the weld. During the vacuuming process, the VAC Seal / STOP
control light lights up. Once the sealing process starts, the light by Seal lights up
as well. Both lights go out when both processes have been completed.
2. Stop function
Press the VAC Seal / STOP button again while the appliance is in use to imme-
diately interrupt the vacuum reap. sealing process. The control lights go out.
B
Seal
Button with two functions:
1. For manually sealing film bags
As an example: If you want to make a bag from film roll and therefore have the
need to weld shut one end of the bag, press the Seal button. As long as the
Seal function is in use, the control light is lit up.
2. For stopping the vacuuming process and immediately sealing the bag in
the VAC Seal function
As an example: If you have selected the VAC Seal function and, while vacu-
uming, notice that the pressure on the foods placed in the bag is getting to
high, you can immediately interrupt the vacuum pump and start the sealing
process, simply by pressing the Seal button. As long as the appliance is sealing,
the control light is lit up. The control light goes out once the process has been
completed.
86
B
A
FI RST U SE
s
CAUTION: Before using the appliance always make sure that the appliance
and the bags are absolutely clean, dry and without damage so that food
does not get contaminated.
APPLIANCE INSTALLATION
Place the appliance on a sufficiently large, moisture- and heat-resistant, horizontal,
clean and dry work surface. Note that you also need space for the food filled bags
to be vacuumed.
CONNECTING THE POWER PLUG
Plug the power plug into a suitable power outlet.
NOTE: Should you use ready made vacuum bags, you can proceed directly to
point II. of these instructions.
87

Publicité

Table des Matières
loading

Table des Matières