Adjusting The Amount Of Coffee That Will Be Dispensed; Adjusting The Brewing Strength - Melitta LATTEA Mode D'emploi

• When water is no longer outlet and the symbol for the milk shower
illuminated, turn the rotary switch for the milk shower anticlockwise to
close the milk shower.
→ the appliance is ready for operation.

Adjusting the amount of coffee that will be dispensed

• turn the coffee quantity regulator (Fig. A, no. ) to variably adjust the
dispensing quantity (regulator to the left: less coffee, regulator to the right:
more coffee).
Coffee quantity
for single-cup
dispensing
for two-cup
dispensing

Adjusting the brewing strength

• Press the button for brewing strength
among three possible degrees of brewing strength.
→
Your selection is indicated by the bean symbols
Display
• You can also change the coffee flavour via the fineness level of the grin-
der. see page 64 for more information in this regard.

Heft_Lattea_EU.indd 52
Regulator far Regulator in
left the middle
30 ml 125 ml
2 x 30 ml 2 x 125 ml
several times to select from
Brewing strength
mild
normal
(factory setting)
strong
is
Regulator far
right
220 ml
2 x 220 ml
in the display.
09.07.2009 15:28:56