Adjusting The Amount Of Coffee That Will Be Dispensed; Adjusting The Brewing Strength - Melitta SOLO Mode D'emploi

Adjusting the amount of coffee that will be dispensed

• turn the coffee quantity regulator (Fig. A, no. ) to variably adjust the
dispensing quantity (regulator to the left: less coffee, regulator to the right:
more coffee).
Coffee dispensing
quantity
for single-cup
dispensing
for two-cup
dispensing

Adjusting the brewing strength

•
Press the button for brewing strength
among three possible degrees of brewing strength.
→ Your selection is indicated by the bean symbols
Display
•
You can also change the coffee flavour via the fineness level of the grin-
der. see page 58 for more information in this regard.

Heft_Solo_EU.indd 48
Regulator far Regulator in
left the middle
30 ml 125 ml
2 x 30 ml 2 x 125 ml
several times to select from
Brewing strength
mild
normal
(factory setting)
strong
Regulator far
right
220 ml
2 x 220 ml
in the display.
09.07.2009 15:47:29