Melitta LATTEA Mode D'emploi page 73

•
simultaneously press the button for single-cup dispensing
On / Off button
→ the standby symbol
quently, the symbol for the water reservoir
•
Flip up the lid of the water reservoir (Fig. A, no. ) and pull the water
reservoir up and out of the appliance.
→ the symbol for the milk shower
• Place a bowl under the milk shower.
• turn the rotary switch for the milk shower clockwise to open the milk
shower.
Warning!
Danger of scalding due to hot steam
Avoid scalding injuries from the milk shower when evaporating the appli-
ance.
→
Water runs out of the milk shower and into the bowl; also steam escapes. the
symbol for the milk shower
•
When steam no longer escapes, turn the rotary switch for the milk shower
anticlockwise to close the milk shower.
→ the appliance has been dried out.
Note
the Melitta claris
of time. consequently we recommend storing the Melitta claris
filter in a glass of water in the refrigerator if the device will not be used for
a longer period of time.
Heft_Lattea_EU.indd 73
for more than 2 seconds.
is illuminated after a brief heat-up phase. subse-
is illuminated.
is flashing.
water filter should not remain dry over a longer period
®
and the
will be illuminated.
water
®

09.07.2009 15:29:12