Technical Data; Conformity; Standards; Licenses - Burkert 8798 Manuel D'utilisation

Technicaldata
6 TECHNICAL DATA
6.1

Conformity

In accordance with the EC Declaration of conformity, the Remote
Sensor Type 8798 is compliant with the EC Directives.
6.2

Standards

The applied standards on the basis of which compliance with the EC
Directives is confirmed are listed in the EC type examination certificate
and/or the EC Declaration of Conformity.
6.3

Licenses

The product is approved for use in zone 2 and 22 in accordance with
ATEX directive 94/9/EC category 3GD.
Observe instructions on operation in an explosion-risk (Ex)
area. Observe the ATEX additional instructions.
The product is cULus approved. Instructions for use in the UL area
see chapter "6.9 Electrical data".
Type 8798
6.4 Operating conditions
WARNING!
Solar radiation and temperature fluctuations may cause mal-
functions or leaks.
▶ If the device is used outdoors, do not expose it unprotected to
the weather conditions.
▶ Ensure that the permitted ambient temperature does not exceed
the maximum value or drop below the minimum value.
Ambient temperature: -25 °C – +80 °C
Degree of protection:
Evaluated by the manufacturer:
IP65 / IP67 according to EN
60529
1)
Only if cables, plugs and sockets have been connected correctly and in
1)
compliance with the exhaust air concept, see chapter "9.4 Pneumatic
connection".
6.5 Mechanical data
Dimensions: See data sheet
Housing material: Linear Remote Sensor:
exterior: PPS, PC, VA,
english
Evaluated by UL:
UL Type 4x Rating
1)
9