Table des Matières
Publicité
14-10
Conformité
We Parker Hannifin Manufacturing Limited, address
as below, declare under our sole responsibility that the
above Electronic Products when installed and operated
with reference to the instructions in the Product
Manual (provided with each piece of equipment) is in
accordance with the relevant clauses from the following
standards:- EN 61800-3 (2004)(+A1:2012)
Note: Filtered versions
We Parker Hannifin Manufacturing Limited, address
as below, declare under our sole responsibility that the
above Electronic Products when installed and operated
with reference to the instructions in the Product
Manual (provided with each piece of equipment) is in
accordance with the
Notes:
Non-filtered versions
This is provided to aid justification for EMC
Compliance when the unit is used as a component.
Registered Number 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
DECLARATION OF CONFORMITY
AC10 S
V
ERIES
MANUFACTURERS EC DECLARATIONS OF CONFORMITY
EMC Directive
In accordance with the EC Directive
2014/30/EU
MANUFACTURERS DECLARATIONS OF CONFORMITY
EMC Declaration
relevant clauses from the
following standards:-
BSEN61800-3 (2004)(+A1:2012)
Parker Hannifin Manufacturing Limited, Automation Group, Electromechanical Drives Business Unit,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44 (0) 1903 737000,
S
D
ARIABLE
PEED
RIVES
We Parker Hannifin Manufacturing Limited,
responsibility that the above Electronic Products
when installed and operated with reference to
(provided with each piece of equipment), is in
accordance with the following standard :-
EN 61800-5-1 (2007)
Low Voltage and Machinery Directives
The above Electronic Products are components
to be incorporated into machinery and may not
equipment may only be put into service when
(Drives Engineering & Global EM Compliance Manager)
FAX:
Date CE marked first applied: 01/12/13
Low Voltage Directive
In accordance with the EC
Directive
2014/35/EU
address as below, declare under our sole
the instructions in the Product Manual
be operated alone.
The complete machinery or installation
using this
all safety considerations of the Directive
2006/42/EC are fully implemented.
Particular reference should be made to
EN60204-1 2006 (Safety of Machinery -
Electrical Equipment of Machines).
All instructions, warnings and safety
information of the
Product Manual must be
implemented.
Dr. Martin Payn
+44 (0)1903 737100
Variateur AC10
Publicité
Table des Matières
