Locking Units To Grams (Optional) - natus OLYMPIC SMART SCALE 60 Mode D'emploi

Section 1: Installation

Locking Units to Grams (Optional)

The standard configuration of the scale allows you to toggle the units of
measurement between metric and English (grams and pounds). You can
permanently lock the units to measure grams only.
1. Press On/Off on the front panel to turn on the scale.
2. Press gm/lb until grams are selected.
3. Press On/Off to turn off the scale.
4. Lift and turn over the scale to gain access to the gm/lb disabling switch.
With the scale oriented as shown below, the switch can be accessed through
a 3/8" hole on the right hand side of the bottom of the scale. (Fig. 1B)
5. Flip the gm/lb disabling switch to the left.
6. Press On/Off to turn on scale. The units are now locked to grams.
7. Press gm/lb to verify the units are locked to grams. If locked, the display
should still read grams.
8. Place the locked to GRAMS label over the gm/lb switch.
Fig. 1B
Page 1-2
OLYMPIC SMART SCALE
Access to gm/lb
disabling switch
® Model 60/65