Electrical Requirements; Electromagnetic Compatibility; Battery Operation; Initial Battery Charge - natus OLYMPIC SMART SCALE 60 Mode D'emploi

Section 1: Installation

Electrical Requirements

The scales are rated at 120 Vac, 60 Hz, 0.2 amps. A 6-ft. (1.8 m)
power cord is included with each scale.
CAUTION: Only connect this device to a hospital-grade
electrical outlet.

Electromagnetic Compatibility

This equipment complies with EMC limits for the Medical Device
Directive 93/42/EEC (EN 55011Class A and EN 60601-1-2). For more
information, see Section 3: Service, "EMI/EMC Compatibility."

Battery Operation

When not connected to an electrical outlet, the scale can be powered
by its internal rechargeable battery pack. The battery pack includes
six sub-c NiCad batteries rated at 7.2 volts (1.2 volts per cell).
For information on replacing the battery pack, see Replacing the
Battery Pack on page 3-14.

Initial Battery Charge

The Smart Scale has an internal rechargeable battery pack that
automatically charges when it is connected to an electrical outlet.
Before the scale is battery operated for the first time, the batteries
should be charged for approximately 2.5 hours.

Equipment Classification

CAN/CSA C 22.2 No. 601.1

UL 2601-1

I
Class

Type B Equipment

Ordinary Equipment IXPO

Continuous Operation

Page 1-4
OLYMPIC SMART SCALE
® Model 60/65