Storage; Waste Disposal And Environmental Protection; Spare Parts/Accessories; Technical Data - Grizzly EKS 2240 QTX Traduction De La Notice D'utilisation Originale

Storage

• Clean the equipment before putting it
away.
• Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see
disposal and environmental
• Put on saw bar protection
• Store the appliance in a dry place well
out of reach of children.
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with
domestic waste.
Empty the oil tank carefully and hand in
your electric chainsaw at a disposal center.
The plastic and metal parts employed can
be separated out and thus recycled use can
be implemented. Ask our Service-Center
for details. We dispose of your defective de-
vices free of charge.

Spare Parts/Accessories

Spare parts and accessories can be ob-
tained at www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see "Grizzly Service-Center"). Please have
the order number mentioned below ready.
Oregon saw chain.................... 3009 1570
Oregon chain bar ..................... 3010 0412
Bio chain oil 1 liter ................... 3023 0001
Bio chain oil 5 liter ................... 3023 0002
If further spare parts should be necessary,
„Waste please find the part number on the explod-
protection"). ed drawings.
sheath.

Technical Data

Electrical chainsaw .......... EKS 2240 QTX
Rated input voltage ..............230 V~, 50 Hz
Input power .................................... 2200 W
Safety class ...........................................
Protection type .................................... IP20
Chain speed ..................................13.6 m/s
Weight
Chain bar .. Oregon 160SDEA041 (112364)
Chain ............................. Oregon 91P057X
Sawing length ........................max. 395 mm
Length of the chain bar ..................460 mm
Sound pressure level
Sound power level (L
Vibration at the handle
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The Oregon replacement saw
chain is to be used only in con-
junction with the associated
Oregon blade and the electric
chainsaw approved for this.
There is a risk of injury.
without guide rail and chain ........... 4.6 kg
with guide rail and chain ................5.4 kg
Chain link separation .......3/8" (9.53 mm)
Chain width ................................1.27 mm
Teeth of the sprocket chain wheel .........7
(L ) ....................96.0 dB(A); K
pA
measured ........108.0 dB(A); K
guaranteed ...........................112.0 dB(A)
(a ) ........................6.97 m/s
h
GB
=3.0 dB
pA
)
WA
=3.0 dB
WA
; K=1.5 m/s²
2
II
181