General Description; Function Description; Overview - Grizzly EKS 2240 QTX Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65
Tip contact in some cases may cause a sud-
den reverse reaction, kicking the guide bar
up and back towards the operator
Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly
back towards the operator.
Either of these reactions may cause you to
lose control of the saw which could result in
serious personal injury. Do not rely exclu-
sively upon the safety devices built into your
saw. As a chain saw user, you should take
several steps to keep your cutting jobs free
from accident or injury.
Kickback is the result of tool misuse and/
or incorrect operating procedures or
conditions and can be avoided by taking
proper precautions as given below:
Maintain a firm grip, with thumbs
a)
and fingers encircling the chain saw
handles, with both hands on the saw
and position your body and arm to
allow you to resist kickback forces.
Kickback forces can be controlled by the
operator, if proper precautions are taken.
Do not let go of the chain saw
b)
Do not overreach and do not cut
above shoulder height. This helps pre-
vent unintended tip contact and enables
better control of the chain saw in unex-
pected
situations..
Only use replacement bars and
c)
chains specified by the manufac-
turer. Incorrect replacement bars and
chains may cause chain breakage and/
or kickback.
d)
Follow the manufacturer´s sharpen-
ing and maintenance instructions
for the saw chain. Decreasing the
depth gauge height can lead to in-
creased kickback.

General description

Function description

The chainsaw is driven by an electric mo-
tor.
The circulating chain is led around a
saw bar (guide rail)
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.
The diagrams for the operation of the
device can be found on pages 2 + 3.

Overview

1 Rear handle
2 Oil filler cap
3 Oil tank cap
4 Chain brake
guard
5
Chain bar (Guide rail)
6
Saw chain
7 Nose sprocket
8 Bumper
9 Front handle
10 Electric motor
11 On/off switch
12 Safety lock
13 Chain catcher
14 Chain adjustment ring
15 Safety bolt
16 Sprocket chain wheel covering
17 Rear hand guard
18 Cable holder
19 Mains cable
20 Saw bar protection sheath
GB
handle, front hand
171

Publicité

Table des Matières
loading

Table des Matières