Adjusting The Carburettor; Resharpening.of.the.saw.chain; Storage; General Storage Instructions - Grizzly BKS 25 L Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
5. Adjust the gap by carefully ben-
ding the bow of the spark plug
as necessary.
6. Use a steel brush to clean the
spark plug.
7. After cleaning and adjustment,
put the spark plug back in or
replace a damaged plug with a
new one.
8. Put the ignition cable back on.
Changing the Fuel Filter
. Never.operate.the.equipment.
without.a.fuel.filter..Change.
the.fuel.filter.regularly.
L
1. Drain the fuel tank (21) into an
appropriate container.
2. Pull the fuel suction head (41) out
of the tank with a hook and turn
to pull it off.
3. Replace the fuel filter and place
the removed suction head back
in the tank
Lubricate the gearbox
M
.
The.gearbox.(2).has.two.lubricating.
nipples.(3a).and.(3b)...
The.transmission.should.be.regrea-
sed.every.15.–.20.operating.hours,.
not.before.each.use..To.do.this,.use.
a.grease.gun.to.introduce.approx..
3.–.5.g.grease.

Adjusting the carburettor

The carburettor has been set for optimised
performance in the factory. Any readjust-
ments that may become necessary should
be made by an expert.
Resharpening of the saw
chain
Leave.the.resharpening.of.a.saw.chain.
to.an.expert.or.proceed.according.to.the.
instructions.of.your.saw.chain.sharpener..
Resharpening.a.saw.chain.takes.some.prac-
tice..If.in.doubt,.replacing.the.saw.chain.is.
preferable.

Storage

General storage instructions

•. Carefully.clean.the.appliance.and.its.
accessories.as.a.means.against.mould.
(see.Maintenance.and.Cleaning)..
•. Keep.the.appliance.in.a.dry.and.dust-
proof.place.and.out.of.the.reach.of.
children.
•. Do.not.wrap.the.appliance.in.plastic.
sacks.because.this.may.promote.hu-
midity.and.mould.
Storage at shutdown periods
. Non-compliance.with.the.storage.
instructions.may.provoke.starter.prob-
lems.or.permanent.damage.due.to.
fuel.left.in.the.carburettor.
1.. Drain.the.fuel.tank.in.a.well-ventilated.
place.
2.. Start.the.engine.and.leave.it.idling.until.
the.engine.stops.and.the.carburettor.is.
free.from.fuel.
3.. Allow.the.engine.to.cool.down.(approx..
5.minutes).
Shutdown.periods.of.more.than.3.
months:
4.. Use.a.spark.plug.wrench.to.unscrew.
the.spark.plug.(see.„Replacing./.ad-
justing.the.spark.plug").
GB
111

Publicité

Table des Matières
loading

Table des Matières