Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Symbols used on the saw
Caution! Danger!
Read and take note of the operating
manual belonging to the machine!
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Do not expose the unit to rain. The
device must not be wet, nor should it
be operated in a moist environment.
Caution! Remove the plug immedi-
ately from the plug socket in case
of damage or cutting through of the
mains cable
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face protec-
tion, safety helmet,
working clothes
Wear
cut-protection
Wear
cut-protection safety boots
with anti-slip soles.
Use protective clothing.
L
WA
Sound power level guaranteed
dB
460 mm
Length of the chain bar
Machines do not belong with do-
mestic waste.
Safety class II
Always use the chain-
saw with both hands.
cut-protection
and ear protection.
gloves.
Symbol on the oil filler cap:
Indication on oil filler neck
Symbol on the fixing screw for the
chain wheel cover:
Open
Symbols used in the
instructions
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on prevention
of harm / damage.
Notice symbol with information on
how to handle the device properly.
General safety instructions for
power tools
WARNING! Read all safety di-
rections and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated pow-
er tools (with power cord) and to battery-
operated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
GB
Closed
167
Publicité
Chapitres
Table des Matières
