Scheppach HS510 Traduction Du Manuel Original page 21

Assembly
For packaging reasons your machine is not completely
assembled.
Please check for completeness of parts when unpacking.
Packing List
machine
axis with wheels
Rocker extension
saw blade changing tool
Equipment pack
User's manual
Assembly of axel, Fig. 5
Place the axel in place and tighten it with the screw
included in package.
Mounting of the rocker extension (Fig. 6)
Slide the rocker extension (19) into the opening on the
left side of the rocker and align it correctly in order for the
firewood to sit firmly. Then tighten the rocker extension
with the adjustment screw (15).
Transport Fig. 7–10
Place the jack in the transport position and secure it with
the locking lever 20 fig. 7
Moving equipment in operating position fig. 8
To transport the unit, tip the axel forward. Fig. 9
In order to move the saw easily, tip it in the direction of
the person moving it.
Lift the machine up and use your foot to pull the axel
towards your body so that the saw is once again in the
operating position. Fig. 10
Attention! The saw may only be used when all four feet
are securely on the ground. The transportation equip-
ment must be in the operating position fig. 8
21