Manufacturing Information - Enerzone Solution 3.5 Manuel D'installation Et D'utilisation

Report prepared for: Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on 9/6/2018 2:01:07 PM

MANUFACTURING INFORMATION

Product Covered
The model Solution Series 3.5 Wood Fuel Room Heater is constructed of sheet steel. The outer dimensions are
33 3/4-inches deep, 34 7/16-inches high, and 27 9/16-inches wide. The unit has a door located on the front with a
viewing glass.
Proprietary drawings and manufacturing methods are on file at Intertek in 1829
32nd Avenue Montreal (Lachine), QC Canada H8T 3J1 and in the EPA filing system. Drawings can also be found
in this specification and in EPF' system.
The unit that was tested was the Solution 3.5 model. It is considered a representative unit of the Solution 3.5
Series.
Stove Builder International Inc. | 44826 | Rev: Aug 31 2018 3:17PM | Uncontrolled Copy Page 6 of 201