Appendix 3: Installing Trims - Enerzone Solution 3.5 Manuel D'installation Et D'utilisation

Report prepared for: Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on 9/6/2018 2:01:07 PM
1 - Installation Manual English (46 of 57)

Appendix 3: Installing Trims

Your freestanding Enerzone wood stove is equipped with decorative u-shaped trims. See
installation instructions below:
46
Stove Builder International Inc. | 44826 | Rev: Aug 31 2018 3:17PM | Uncontrolled Copy
1- Remove the 7 screws that secure the side
panels and the rear top air deflector.
2- Slide the panels towards the front to release
them from the front brackets.
3- Choose between the gold or nickel "U"
shaped decorative insert and remove the
protection film before their installation.
4- Align the decorative inserts with the top and
bottom slots of the front edge of the panels.
Then push the decorative inserts to clip
them into place. See detail A
5- Slide the panels into the front brackets and
reinstall the panels and top air deflector
using the screws removed in step 1.
Solution 3.5 Installation and Operation Manual
Page 54 of 201