Certificate Of Conformity - Enerzone Solution 3.5 Manuel D'installation Et D'utilisation

Report prepared for: Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on 9/6/2018 2:01:07 PM
Certificate of Conformity - SBI - Solution 3.5 Series Emissions and Efficiency -
EPA
This is a certificate of conformity
to certify that the bearer has
successfully completed the
requirements of the above
scheme which include the
testing of products, the initial
assessment, and are subject to
continuing annual assessments
of their compliance and testing
of samples of products taken
from production (as applicable
to the scheme) and has been
registered within the scheme for
the products detailed.
www.intertek.com
The certificate and schedule are held in force by regular annual surveillance visits by Intertek Testing Services NA, Inc. and the reader or user should contact Intertek to validate its status. This
certificate remains the property of Intertek Testing Services NA, Inc. and must be returned to them on demand. This Certificate is for the exclusive use of Intertek's Client and is provided pursuant to
the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party,
other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this certificate. Only the Client is authorized to permit copying or distribution of
this certificate and then only in its entirety. Use of Intertek's Certification mark is restricted to the conditions laid out in the agreement. Any further use of the Intertek name for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate
usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
Stove Builder International Inc. | 44826 | Rev: Aug 31 2018 3:17PM | Uncontrolled Copy

Certificate of Conformity

Emissions – Solid Fuel Emissions and
Efficiency
ASTM E3053-17, ASTM E2515-2011, CSA B415.1-2010
Certificate number: WHI18 – 21514309
Organization:
Stove Builder International Inc.
250 de Copenhague
St-Augustin-de-Desmaures
G3A 2H3
Canada
Model Solution 3.5 Series
Product:
Maximum Output: 49,500 Btu/hour
Weighted Average Emissions Rate: 1.32 g/hr.
Average CO Emissions Rate: 1.37 g/min Weighted Average
Efficiency: 71% HHV
Test Fuel Type: Cordwood
Compliance: Certified to comply with 2020 particulate emissions standard. Report
Number: 103536746MTL-002
Certification body: Intertek Testing Services NA, Inc.
Initial registration: August 31, 2018
Date of expiry: No expiry date
Issue status: 1
Charles Meyers
Certification Manager
Name
Registered address:
Intertek Testing Services NA, Inc. 545 E. Algonquin Rd. Arlington Heights, IL 60005 USA
Weighted
Signature
08/31/2018
Date
Page 5 of 201