Calculating Channels - Parker Service Master CONNECT Manuel D'utilisation

Operation

6.10.5 Calculating Channels

The Calculating channels tile displays the following information:
Designation
1:
2:
3:
4:
The menu is used to select the corresponding type of calculation for
each channel. The following calculation types are available:
Designation
Subtraction
Addition
Volume
Power 1
Power 2
Moving average To calculate a floating average for a channel
100
Description
The calculation type for channel 1
The calculation type for channel 2
The calculation type for channel 3
The calculation type for channel 4
Description
To calculate difference measurements
A condition is the channels have a similar physical
unit
To calculate additions
A condition is the channels have a similar physical
unit
To calculate the flow rate, in liters, within a certain
time
A condition is an active channel with volume flow in
l/min
To calculate power
A condition is at least one pressure channel and one
flow channel
To calculate power through differential pressure
A condition is two pressure channels and one flow
channel
The Parker Service Master CONNECT V1.2/06/21 EN