Creating An Spc (Service Project Container) - Parker Service Master CONNECT Manuel D'utilisation

Operation
6.7.2

Creating an SPC (Service Project Container)

An SPC must be created prior to starting or after stopping a measure-
ment.
1 Connect the sensors to the device according to your application.
Further information is available in Chapter & "Connecting the
Sensors" on Page 35.
2 Set the measurement view required. Further information is avail-
able in Chapter "Edit Channels" on Page 62.
3 Open the options and tap on the Save Template as button.
Fig. 40 Create an SPC (Service Project Container) (1)
Ä The Save template window opens.
84
The Parker Service Master CONNECT V1.2/06/21 EN