Measuring Methods; Start/Stop - Parker Service Master CONNECT Manuel D'utilisation

Operation
6.5

Measuring Methods

The device is provided with the following measuring methods:

■ Start/Stop

■ Data logger
■ Point measurement
■ Trigger
■ Trigger logic
■ Fast measurement (is only available when IN4 and IN5 are active)
Measured values are buffered in the device's working memory and
stored in a defined device memory. The ACT values or ACT, MIN and
MAX values are stored depending on the measuring method and set-
tings selected.
You can switch between the measuring methods.
1 Tap on the measuring method menu option.
2 Tap on the measuring method required.
Ä The measuring method selected is displayed.
INFORMATION
The button displays the name of the measuring method selected (e.g.
Start/Stop).
Fig. 32 Measuring methods
66
The Parker Service Master CONNECT V1.2/06/21 EN