Parker Service Master CONNECT Manuel D'utilisation page 236

Operation
The table below contains information on the triggers available:
Designation
Level
Window
Time
External
Channel warn-
ing value
Channel alarm
value
The following methods are available in the Switch function area:
Designation
NCLS (Opener)
NOPN (Closer)
96
Description
Measurement is started/stopped on exceeding or
dropping below a limit value
Measurement is started/stopped on exceeding or
dropping below one of two limit values for a defined
measuring range
Measurement is started/stopped at a defined mo-
ment of time
Measurement is started/stopped on transition of a
digital signal from High to Low
Measurement is started/stopped on transition of a
digital signal from Low to High
Measurement is started/stopped when defined
warning values occur
Measurement is started/stopped when defined
alarm values occur
Description
0 = Active-Low:
Output is < 0.2 V (closed)
1 = Active-High:
Output is dead (open)
1 = Active-High:
Output is dead (open)
0 = Active-Low:
Output is < 0.2 V (closed)
The Parker Service Master CONNECT V1.2/06/21 EN