Parker Service Master CONNECT Manuel D'utilisation page 219

The file size expected and maximum storage time for the measurement
are calculated and displayed according to the applicable parameters
selected.
The table below contains information on the triggers available:
Designation
Keystroke
Level
Window
Time
External
Channel
warning value
Channel alarm
value
INFORMATION
Please note that the D-IN connection must be activated for the exter-
nal trigger. Refer to Chapter & "D-IN/D-OUT F1/F2" on Page 94.
The Parker Service Master CONNECT V1.2/06/21 EN
Description
Measurement is started by tapping on the corre-
sponding button
Measurement is started on exceeding or dropping
below a limit value
Measurement is started on exceeding or dropping
below one of two limit values for a defined
measuring range
Measurement is started at a defined moment of
time
Measurement is started on transition of a digital
signal from High to Low
Measurement is started on transition of a digital
signal from Low to High
Measurement is started when defined
warning values occurs
Measurement is started when defined
alarm values occur
Operation
79