Parker Service Master CONNECT Manuel D'utilisation page 169

Refer to the following overview for the PIN assignment of the analog
connection port (IN4/5) to connect external sensors:
Fig. 9 PIN assignment, analog input module (SCMI-600-01)
PIN Designation
1 +Ub (+24 VDC)
2 Measuring signal 1 (IN4)
3 GND
4 Measuring signal 2 (IN5)
5 GND
Other external sensors without automatic sensor detection can also be
connected to one of the analog connections (IN1-IN3) via an adapter
(current/voltage converter).
INFORMATION
Further information on connecting sensors without sensor detection
via an adapter is available in the manual supplied with the respective
adapter.
After connecting the sensors without sensor detection, complete the
necessary settings for the electrical connection and expected signal ac-
cording to the properties of the sensors connected. Refer to Chapter
& "Input Modules A and B" on Page 98.
The Parker Service Master CONNECT V1.2/06/21 EN
Input Modules
29