Trigger Logic - Parker Service Master CONNECT Manuel D'utilisation

6.5.5

Trigger Logic

The Trigger logic measuring method starts recording of the measured
values after one or two defined triggers are triggered.
Recording is stopped after one or two defined triggers are triggered.
INFORMATION
Please note that you must define the start/stop conditions in order to
be able to use this measuring method.
Select between the following combinations as the start conditions for
the measurement:
■ Condition A
■ Conditions A and B
■ Conditions A or B
Select between the following combinations as the stop conditions for
the measurement:
■ Condition C
■ Conditions C and D
■ Condition C or D
The following triggers are available for the start conditions:
Trigger A
Level
Window
Time
External
Keystroke
Channel
warning value
Channel alarm
value
The Parker Service Master CONNECT V1.2/06/21 EN
Trigger B Trigger C
Level Level
Window Window
Time
External External
Duration
Channel
warning value
Channel alarm
value
Operation
Trigger D
Level
Window
External
75