Measurement Status - Parker Service Master CONNECT Manuel D'utilisation

6.4

Measurement Status

A measurement is started and stopped using the Start/Stop button or
the yellow function key on the device.
The Start/Stop button indicates the current status of a measurement.
The following statuses can be configured:
Status
1 Tap on the Start/Stop button.
Ä The measurement starts up.
INFORMATION
Alternatively, press the yellow function key on the device.
Recording of the measured data begins according to the measuring
method selected, either immediately or after triggering one or several
triggers.
The current runtime of the measurement is displayed underneath the
Start/Stop button.
2 Tap on the Start/Stop button.
Ä The measurement is stopped.
The Parker Service Master CONNECT V1.2/06/21 EN
Description
Measurement has not yet been started, adjustments can
be made.
Measurement is activated, the device is waiting for the
defined trigger to be triggered in order to record the mea-
sured data.
Measurement is started and measured data is recorded.
Operation
65