Parker Service Master CONNECT Manuel D'utilisation page 172

Input Modules
4.4.4 Analog Input Module with galvanic isolation (SCMI-600-03)
The analog input module with galvanic isolation (SCMI-600-03) is
equipped with three analog connection ports, IN1-3, for sensors with
automatic sensor detection (Parker analog) and an analog connection,
IN4/5, for up to two external sensors without automatic sensor detec-
tion (e.g. standard industrial sensors). The connections IN4/5 of the
measuring instrument are galvanically isolated. Interference of the mea-
suring signal can thus be avoided.
The IN4/5 analog connection can be used to complete fast measure-
ments.
The figure indicates the connection ports on the analog input module:
Fig. 12 Analog input module (SCMI-600-03)
Pos. Designation
1 Analog port (IN1)
2 Analog port (IN2)
3 Analog port (IN3)
4 Analog port (IN4/5)
32
1 2
Description
To connect sensors with automatic
sensor detection
To connect sensors with automatic
sensor detection
To connect sensors with automatic
sensor detection
For galvanically isolated connection
of sensors without automatic sensor
detection
3 4
The Parker Service Master CONNECT V1.2/06/21 EN