Parker Service Master CONNECT Manuel D'utilisation page 234

Operation
6.10.3 D-IN/D-OUT F1/F2
The D-IN/D-OUT F1/F2 tile displays the following information:
Designation
Mode
D-IN
D-OUT
The menu is used to select the operating mode and perform further
settings. The following operating modes are available for selection:
Designation
D-IN/D-OUT
Frequency 1/ Frequency 2
Two-channel frequency
D-IN State (0/1)
D-OUT State (0/1)
Setup the selected operating mode according to your application.
Fig. 48 Connection D-IN/D-OUT F1/F2, settings
Further information is provided on the following pages and in the
& Technical Data related to the sensor connected.
94
Description
Current operating mode
Current operating status of the D-IN connection port
Current operating status of the D-OUT connection
port
Description
DIGITAL-IN and DIGITAL-OUT
Two-channel frequency for volume flow
Frequency connection with
rotation direction detection
Operating mode D-IN
Operating mode D-OUT
The Parker Service Master CONNECT V1.2/06/21 EN