Parker Service Master CONNECT Manuel D'utilisation page 171

Refer to the following overview for the PIN assignment:
Fig. 11 PIN assignment, CAN input module (SCMI-600-02)
PIN Designation
1 Shielding
2 Not connected
3 GND
4 CAN High
5 CAN Low
After connecting the sensors without sensor detection, complete the
necessary settings for the electrical connection and expected signal
according to the properties of the sensors connected. Refer to Chap-
ter & "Input Modules A and B" on Page 98. Analog Input Module
(SCMI-600-01)
The Parker Service Master CONNECT V1.2/06/21 EN
Input Modules
31