Star Lab GuardOne Manuel page 5

In this operating manual, all functions with regards to the pre- and Hepa filter as well as the UV lamp are described. If you have a
Dead Air model, you can ignore the instructions for operating, replacing, maintaining and troubleshooting the filters.
This operating manual provides the instructions for the Laminar Flow, size 32" with one Hepa and prefilter and one UV lamp. If
you have a model Laminar Flow or Dead Air of size 48", follow the instructions for installation and maintenance of Hepa filters,
UV lamps and pre-filters twice to install and replace the lamps and filters.
Function
The GuardOne Workstation is a containment equipment using air filtration technology and UV irradiation to create a working environment in
®
which the risk of cross-contamination under standard laboratory working conditions is minimized.
To achieve this, the GuardOne Workstation uses the following components:
®
› Create a clean air environment
Combination of low-noise blower motor, standard Hepa filter and pre-filter.
Decontamination and sterilization of the working area
›
UV light with a fixed wavelength of 254 nm.
STARLAB Service Hotline
For further information, contact your local STARLAB service or your local STARLAB sales representative on www.starlabgroup.com.
Overview of the GuardOne
GuardOne
Workstation
®
Setup und Function
5
® · Manual ·