Setup Und Function; Overview Of The Guardone ® Workstation; Setup And Function - Star Lab GuardOne Manuel

Overview of the GuardOne

Setup und Function

1 Overview of the GuardOne
1.1

Setup and Function

Setup
Fig. 1: GuardOne Workstation
®
A Top housing unit
B PC (Polycarbonate) glass chamber
1 Top housing with pre-installed pre-filter and Hepa filter
2 Plastic rivets
3 Side panel
Models
There are two different kinds of models of the GuardOne
Each of them you can order in two sizes.
The two sizes of the GuardOne
› 32": In this size, the GuardOne
› 48": In this size, the GuardOne
two pre- and two Hepa filters.
The dimensions can be found Chapter 10 "Specifications" on page 49.
Dead Air
› This type of the GuardOne
the working area using the UV lamps.
› You can retrofit the model with engine and pre- and Hepa filter at any time.
Laminar Flow
› Depending on its size, the Laminar Flow model is delivered with one (in 32" version) or two (in 48" version) blower motors and one or
two pre- and one or two Hepa filters. In addition, one or two UV lamps are included.
› This type of GuardOne Workstation can create a clean air environment using the airflow function and it decontaminates the working area
®
using the UV lamps.
4
· GuardOne · Manual
®
Workstation
®
Workstation
®
Workstation, a Dead Air and a Laminar Flow model.
®
® Workstation are:
® Workstation has one UV lamp and, assuming it is the Laminar Flow model, one pre- and one Hepa filter.
Workstation has two UV lamps and, assuming it is the Laminar Flow model, two blower motors,
®
Workstation lacks the airflow function to create a clean air environment. Nonetheless, you can decontaminate
®
4 Back panel
5 Base plate
6 Pre-installed front door with two folding segments
7 Multifunctional shelf
8 Touchscreen display with graphical user interface