Star Lab GuardOne Manuel page 47

Behaviour in case of a malfunctioning door switch
If the door switch is defective, the UV light can no longer be switched on. In addition, the airflow works even when the front door is closed.
Contact your local STARLAB sales representative or STARLAB service technician for further assistance. For contact details, press STARLAB Service &
Order Information on the status page.
Behaviour in case of a power failure
1. Turn the main power switch to ON.
2. Continue with your application.
You do not have to reset previous settings. Previous settings are retained in the event of a power failure.
Behaviour in case of a malfunctioning LED light
In case of a malfunctioning LED light bar, faults will not be displayed on the control display.
1. Turn the main power switch to OFF.
2. Wait a few minutes before turning on the GuardOne
3. Turn the main power switch to ON.
4. Enter the settings for the LED light again.
If the LED light still does not work, contact your local STARLAB sales representative or STARLAB service technician. For contact details,
press STARLAB Service & Order Information on the status page.
Behaviour in case of a malfunctioning display
In case of a malfunctioning display, the touchscreen with the access to the graphical user interface does not respond to touches.
1. Turn the main power switch to OFF.
2. Wait a few minutes before turning on the GuardOne
3. Turn the main power switch to ON.
If the touchscreen still does not work, contact your local STARLAB sales representative or STARLAB service technician.
Contact details can be found "STARLAB Service Hotline" on page 5 or the back page.
Behaviour in case of breakage due to transport
Contact your local STARLAB sales representative or STARLAB service technician. Contact details can be found "STARLAB Service Hotline"
on page 5 or the back page.
® Workstation again.
® Workstation again.
Troubleshooting
Errors/ Determine Unmonitored Disorders
GuardOne ® · Manual ·
47