Star Lab GuardOne Manuel page 37

Reset
When Reset is pressed, the GuardOne
settings.
Any changes made to screen brightness, LED brightness, quick start
settings, time and date adjustment and backpressure adjustment are
lost. After restoring the factory settings you will also have to calibrate
the touchscreen.
1. Press Reset.
2. Confirm by pressing Reset (1).
The GuardOne Workstation turns off.
®
3. To calibrate the touchscreen, press onto the crosses that will subse-
quently appear in the four corners of the touchscreen with a pencil.
The workstation has been reset to factory settings.
To change the factory settings see Chapter 5 "Putting into service"
on page 25.
® Workstation is reset to the factory
Operating the Display Area
Fig. 43: Reset the GuardOne® Workstation
GuardOne
Operation
37
® · Manual ·