Technical Data; Power Supply / Battery Indicator - DeFelsko PosiTector RTR 3D Mode D'emploi

Technical Data

Measuring Range (H)
Measuring Range (Rt)
Minimum Roughness (Ra)
Accuracy (H)
Accuracy (Rt)
Accuracy (Ra)
Anvil Pressure
Anvil Size
Field of View
Lateral Sampling
Vertical Resolution
Weight (without batteries)
Resolution
Temperature Range
Conforms to: ASTM D4417, ISO 8503-5, NACE RP0287,
SSPC-PA 17, SP6,SP10, SP11-87T and others

Power Supply / Battery Indicator

Power Supply / Battery Indicator
Power Source: 3 AAA alkaline, Lithium or optional Nickel-metal hy-
dride (NiMH) rechargeable batteries. For best battery indicator results,
ensure the appropriate Battery Type is selected in the Setup > Bat-
tery Type menu (pg. 15).
The battery indicator
fully charged batteries installed. As the batteries weaken, the bar will
be reduced. When the battery symbol is low
still be used, but the batteries should be changed or recharged at the
earliest opportunity. The Gage will turn off automatically when
batteries are very low, preceded by a Low Battery Warning on the
display.
!
To retain all user settings and stored memory readings, only
replace the batteries after the Gage has powered-down.
Battery performance decreases at low temperatures.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
20 – 115 µm
10 – 115 µm
2 µm
+ 5 µm
+ (5 µm + 5%)
+ (0.25 µm + 5%)
110 grams-force
Ø6.25 mm
3.8 x 3.8 mm
3.7 µm
100 nm - 2D/3D
10 nm - SDF
140 g
1 µm
0° to 40°C
displays a full bar with fresh alkaline or
29
0.8 – 4.5 mils
0.4 – 4.5 mils
0.08 mil
+ 0.2 mil
+ (0.2 mi + 5%)
+ (0.01 mi + 5%)
1.1 Newtons
Ø0.25 inch
4.9 oz
0.1 mil
+32° to +104°F
the Gage can