Units - DeFelsko PosiTector RTR 3D Mode D'emploi

Units

Converts the display from inch to metric or vice versa. Stored
measurements in memory are not converted. Switching units will turn
off Statistics view and closes Memory.
2D
Displays a two-dimensional (2D) black and white image of the
replicated surface. When Memory is on, this thumbnail image is
stored with each reading for inclusion into inspection reports.
3D
Displays a low-resolution color three-dimensional (3D) image of the
replicated surface. When Memory is on, this thumbnail image is
stored with each reading for inclusion into inspection reports.
NOTE:
Press the Up navigation button to toggle between 2D and
3D images if the image does not automatically appear on the
display.
Advanced models only
Advanced models only
14