Power Supply; Technical Data - DeFelsko PosiTest AT-M Mode D'emploi

Verification
The PosiTest AT Verifier is available for verifying the accuracy
and operation of PosiTest Adhesion Testers and is an important
component in fulfilling both ISO and in-house quality control
requirements. Fully portable with hardshell carry case for use in
the field or laboratory. Learn more at: www.defelsko.com/at/verifier
The PosiTest AT-M is powered by 2 AAA alkaline batteries which
provide up to 16 hours of continuous use. The batteries should be
replaced when the battery state indicator is low (flashing red).
Conforms to: ASTM D4541, ASTM D7234, ISO 4624, and others.
Specifications:
Resolution:
Accuracy:
Dolly Size (mm)
50 x 50 mm
requires the use of a 50 mm stand off
1
requires the use of a 50 x 50 mm stand off
2

Power Supply

Technical Data

1 psi (0.01 MPa)
±1% Full Scale
10 mm
14 mm
20 mm
50 mm
1
2
Max Pull-Off Pressure
10,000 psi (70 MPa)
6,000 psi (40 MPa)
3,000 psi (20 MPa)
480 psi (3.3 MPa)
375 psi (2.6 MPa)
8