Bluetooth; Updates - DeFelsko PosiTector RTR 3D Mode D'emploi

Send Batches
Transfers selected
switching between devices). The Send Batches option is visible in
the menu when the Gage is connected to a smart device running
the PosiTector App.

Bluetooth

Allows individual datasets to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
Pairing
The instrument and receiving device must be paired before stored or
streamed datasets can be transmitted. For pairing instructions, see
http://www.defelsko.com/bluetooth
Info
Lists information about your current Bluetooth connection, including
the currently paired device and MAC address.
Stream
When checked, the instrument will stream datasets to the paired
Bluetooth Device as they are taken. Datasets can be streamed as they
are taken to the optional Bluetooth printer or third-party computer
software.
Powder Probes
Displays menu options that enable the PosiTector Advanced body to
communicate with wireless PosiTector PC probes.
See http://www.defelsko.com/pc

Updates

Determines if a software update is available for your Gage. If an
update is available, a prompt will appear allowing the user to choose
to perform the update at this time or not.
To perform an update, the Gage must be connected to an internet
connected computer with PosiSoft Desktop (pg. 24), or WiFi network
(pg. 24).
WARNING:
PC or PosiSoft.net. The Gage will perform a Hard Reset (pg. 13) after
completion of the update and ALL readings in memory will be erased.
batches to the PosiTector App (useful when
(Advanced models only)
Ensure that stored measurements are backed up to a
28