Annotate - DeFelsko PosiTector RTR 3D Mode D'emploi

Open
Selects a previously created batch name to open and make current.
If it contains measurements, onscreen statistics will immediately
reflect values calculated from this batch.
Close
Stops the recording process, closes the current batch, and removes
batch information from the display.
Delete
Permanently removes a batch from Gage memory. The name is
deleted and all measurements are erased.
View
Scroll using the Up or Down buttons through information, statistical
summary, and a list of each reading in the currently opened batch.
Press to exit.

Annotate

Create meaningful batch names and enter
notes directly on the Gage using a familiar
onscreen QWERTY keyboard.
Use the Gage's navigation and (-)(+)
buttons to enter annotations.
Annotations can be synchronized with
PosiSoft.net and are included in all PosiSoft
reports (see Accessing Stored
Measurement Data, pg. 24).
NOTE:
Annotations can also be created using PosiSoft.net (pg. 24)
or the PosiTector App (pg. 24).
18