Installation - Agilent Technologies TV 401/301 NSF Mode D'emploi

Installation

Do not remove the protective cap before connecting the turbopump to the
CAUTION!
system. Do not supply the Turbopump until it is adequately connected to the
vacuum system.
Figure 2
Do not install or use the pump in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be respected:
In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The TV 401/301 NSF must be connected to a primary pump (see
"Technical Information").
TV 401/301 NSF User Manual / 87-900-963-01 (E)
temperature: from +5 °C to +35 °C (see the diagram pressure-
temperature in the appendix "Technical Information")
relative humidity: 0 – 95 % (non-condensing)
15BInstructions for Use
141BInstallation
16
229/290