Preparation For Installation - Agilent Technologies TV 401/301 NSF Mode D'emploi

16 15BInstructions for Use
140BPreparation for Installation

Preparation for Installation

The TV 401/301 NSF is supplied in a special protective packing. If
this shows signs of damage which may have occurred during
transport, contact your local sales office.
When unpacking the system, be sure not to drop it and avoid any
kind of sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100 % recyclable and complies with
EEC Directive 85/399.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Figure 1
Normal exposure to the environment cannot damage the TV 401/301 NSF.
NOTE
Nevertheless, it is advisable to keep it closed until it is installed in the system,
thus preventing any form of pollution by dust.
228/290 TV 401/301 NSF User Manual / 87-900-963-01 (E)