Selection Of Installation Location - Profroid QUIETCO2OL MC Notice D'instruction

SELECTION OF INSTALLATION LOCATION

500 mm
1200 mm
250 mm
The OUTDOOR version of the
QuietCO2OL MC is intended
for outdoor installation
The INDOOR version of the
500 mm
QuietCO2OL MC is intended
for indoor installation in a
water free room/area
– The unit must be placed and fixed on an
–
– Vibration should be reduced by a platform
– In order to avoid falling, secure the
– The refrigeration unit must be installed with
– Enough
– The heat exchangers must be installed in
– If devices are used in a corrosive area (sea
horizontal flat surface, that can support the
weight of the unit
or anti-vibration pad in order to avoid
transmission of vibration to the floor and
walls.
refrigeration unit by using anchor bolts.
(Use all securing positions)
an inclination angle 1°or below. If devices
are used in a seismic area, then the installer
must apply all necessary rules.
free space
refrigeration equipment should be provided
to facilitate maintenance operations.
locations free of any external dust or other
pollutants from the neighborhood which
could obstruct or clog the coils.
side, pollutant gas, etc.), make sure that
appropriate anticorrosion protection has
been provided.
all around the
66