Télécharger Imprimer la page

Symbols; Useful Information; Product Description - Roger Technology CTRL Instructions

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 124
2

Symbols

The symbols and their meaning in the manual or on the product label are indicated
below.
Generic danger.
Important safety information. Indicates operations and situations in
which the personnel involved must pay close attention.
Dangerous voltage risk.
Indicates operations and situations in which the personnel involved
must pay close attention to dangerous voltages.
Hot surfaces risk.
Indicates danger due to hot surfaces or which anyway have high
temperatures (risk of burns)

Useful information

Indicates useful information for the installation.
Refer to the Installation and use instructions.
Indicates the obligation to refer to the manual or original document,
which must be available for future use and must not be damaged in
any way.
Protective earth connection point.
Indicates the admissible temperature range.
Alternating current (AC)
Direct current (DC)
Symbol for the product disposal according to the WEEE directive, see
chapter 22.
3

Product description

The CTRL controller is a unit for the sensored control of the ROGER brushless motor powering an electromechanical barrier.
The CTRL uses two magnetic encoders, with one monitoring the motor and another monitoring the position of the boom,
even when it is moved manually.
Ensure that the parameter A1 is set correctly. If this parameter is not set correctly,
the automation system may not function properly.
Two opposing barriers may be connected with a RS485 serial communication cable. This capability is only available with
firmware version 1.3 (
) or later.
We recommend using only ROGER TECHNOLOGY accessories and control and safety devices. Specifically, we recommend
installing F4ES or F4S series photocells.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use or
any use other than the intended usage indicated in this manual.
For further information, refer to the installation manual of the BIONIK4, BIONIK4HP, BIONIK6,
BIONIK8 automation system
61

Publicité

loading