The Setup Menu; Setting Options; Functional Principle; Setting The Parameters - Fronius TransPocket 2500 Instructions De Service

The Setup menu

Setting options

Process
Functional prin- The parameters can be set at 4 levels (TP 2500) or 5 levels (TP 2500 TIG). The number
ciple of indicators lit corresponds to the level reached.
Level 0
Setting the To alter a parameter setting, proceed as follows:
parameters
1.
2.
3.
3.
Important! The parameters remain stored even if the mains plug is disconnected.
Settable parameters
Dynamic
Dynamic
Cel characteristic and arc-force dynamic
TIG Comfort stop
Pulsing frequency (TP 2500 TIG only)
Level 1 Level 2
Using the „Process" button, select the desired parameter and hold the process
button down.
- the set level is indicated for 1 second
- As long as the process button is held down, the set value is raised one level
every second.
Release the process button once the desired level is set.
The setting is now saved
The set process is displayed
Level 3
13
Factory setting
Level 2
Level 2
Level 2
Level 0
Level 1
Level 4 Level 5